| Plumbing
Maintenance is Important
Renter’s insurance generally covers household water damage
if the damage is sudden and accidental, such as damage caused by
burst pipes. It does not cover damage of the sort covered by flood
insurance, i.e., rising water from outside; or damage caused over
time by lack of maintenance.
Identifying
Water Problems
-
Look at your water bill. By comparing monthly usage figures,
you may get tipped off to a small leak before it becomes a big
problem. Major, unexplained fluctuations in your water bill are
often a sign of water leaks.
- Inspect
pipes and fittings each year. Just as you change the batteries
in your smoke detector each year, you should take a few minutes
to inspect under sinks and around washing machines, lavatories,
ice makers and water softeners.
Preventive
Maintenance
- Know
where your water shutoff valve is located and be sure that the
entire family knows how to shut off household water supplies in
the event of a sudden pipe or hose break.
- When
you go on vacation, turn off the water to your washer while you’re
out of town. Many tenants have returned from vacation to find
their washer hoses have burst, flooding their homes.
- Never
leave the house with appliances, such as dishwashers, washers
or dyers, still operating.
- Inspect
around your water heater, washer, dishwasher, sinks, lavatories
and refrigerator ice maker. If hoses indicate wear, ask the landlord
to replace them.
Main
Water Shut Off Valve
Every
tenant should locate their main water shut off valve and know how
to use it.
There are two types of main water valves: the gate valve and the ball
valve.
|
The
gate valve is recognized by its round handle that must
be turned a number of times to open or close the valve.
|
|
|
 |
The
ball valve is recognized by its single handle that needs
to be turned 1/4 turn, or 90 degrees, to turn the water
on or off. |
|
Angle
Stops
- Angle
stops are valves located under your kitchen and bathroom sinks,
at your washing machine, at the toilet, and refrigerator ice maker.
There are angle stops for both hot and cold water. Most angle
stops are of the gate variety and are made of materials that may
fail over time. Replacement of these valves is recommended when
they are showing signs of leaking or they have "frozen"
in the open position - meaning they can’t be turned one
way or the other.
- Angle
stops need to be "exercised" regularly to make sure
they are not frozen in the open position. Every month or two simply
turn the angle stops off and on a few times. This will keep them
working as they were designed. Never force a valve that is frozen
in position. Call your landlord to have them replaced.
Water
Supply Lines
Water
supply lines are connected from the angle stop to the appliance
they serve, such as a faucet, toilet, washing machine, dishwasher
and refrigerator ice maker. Many times these are thin rigid lines
that can easily break and cause extensive damage. Water supply lines
should be checked regularly for corrosion and rust and changed every
5 to 7 years.
Washing
Machine
-
The washing machine supply box shown is found in most recently
constructed homes. The box sits inside the drywall and the
angle stops are inside the box.
- The
water to the washing machine should always be turned off
when the machine is not in use. Leaving the water on places
the washing machine hoses and valves under constant pressure.
The life of the washing machine hose can be prolonged if
the water is turned on only when the machine is in use.
- Washing
machine hoses need to be checked regularly and replaced
periodically. Most failures occur at the coupling. Either
type should be used in accordance with the washing machine
manufacturer's recommendations. Always change hoses when
a new machine is purchased, or you move to a new location.
Regardless of the material the hose is made of, it needs
to be checked and changed regularly.
|

Washing
Machine Supply Box
|
Cleaning
Up After a Leak
- Turn
off water to the house.
- Remove
as much water as possible with mopping and blotting.
- Remove
all photos, art and small fixtures to a safe, dry place.
- Remove
damp books from shelves and spread out to dry.
- Wipe
wooden furniture dry. Prop up cushions for even drying.
- Open
drawers, cabinets and closets for faster drying.
- Put
aluminum foil, saucers or wood blocks between furniture legs and
wet carpeting.
- Remove
rugs from on top of wet carpet to prevent color saturation.
- Remove
items that are not colorfast, such as books and magazines, from
wet flooring and carpet.
- Immediately
use fans to circulate air and encourage drying.
- Try
to stabilize the indoor air temperature to about 70 degrees and
use dehumidifiers, if possible.
|